Tinker Mission · 02
Project recap sheet
Laser alarm
A page to fill in after the build. Print it and keep it with your notes.
Built on
Built by
What I built
What I learned
Sensors · Voltage dividers · Thresholds · If/then code · Wi-Fi alerts
What went wrong, and what I changed
Next time, I want to try
Parts used
- 1 × ESP32 board
- 1 × Laser module
- 1 × 3×AA battery holder
- 1 × Photoresistor (LDR)
- 1 × 10 kΩ resistor
- 1 × 220 Ω resistor
- 1 × Green LED
- 1 × Active buzzer module
- 1 × Push button
- 1 × Breadboard
- 1 set × Jumper wires (male-to-male)
- 5 × Jumper wires (female-to-male)
- 1 × USB cable
- 1 × USB power bank